MENU ☰
Home›Blog›BUYER BRIEF
BUYER BRIEF

Custom acrylic display cost: the four things a quotation is actually made of

A custom acrylic display is priced from sheet area, thickness, edge finishing, joint count and packed volume, in that order of influence. Knowing which of those your drawing changes is the difference between negotiating a price and negotiating a guess.

Acrylic display parts staged in the workshop before assembly
50 unitsMinimum order · all products
3–7 daysProduction · 50-unit orders
20,000 units/dayFinished display production capacity

Production for a 50-unit order takes 3–7 days after drawings and order details are confirmed and payment has been received. Transport time is excluded. Larger-order schedules and sample timing are confirmed separately.

Company-confirmed information · October 6, 2026. Daily capacity is not a delivery guarantee for an individual order. Final specifications and schedule are confirmed in the written quotation.
2018Verified establishment year
51–100Verified team size
3,000–5,000㎡Verified factory size
Zhejiang, ChinaManufacturing location

Material cost is sheet area multiplied by thickness

A quotation starts from the sheet: the area of every part, multiplied by the thickness drawn, at the grade specified. Doubling thickness roughly doubles the material in that part, and it also changes how the part behaves, because a 5 mm panel resists a span that a 3 mm panel sags under. Thickness is therefore chosen for stiffness first and cost second. Cast and extruded sheet are both sold as clear acrylic and they are not interchangeable where an edge will be polished: cast sheet machines and polishes predictably, extruded sheet is the cheaper choice for straight cuts and printed panels.

  • List every part with its own area and thickness, not one overall size.
  • State whether edges will be polished, because that decides whether cast sheet is required.
  • Ask whether your parts can be nested together, which is where sheet waste actually falls.

Edge finishing is the line buyers underestimate

A sawn edge is matte and slightly rough. It is the cheapest edge and it is correct where the edge sits against a wall or inside a frame. Sanding removes the saw marks and softens the corner, flame polishing melts the surface to a gloss, and diamond polishing produces the closest match to the sheet face. Each is a separate pass over every edge, so a unit with twelve polished edges carries materially more labour than the same unit with sawn edges, and the difference is invisible until the piece is lit from the side.

  • Decide which edges are actually seen; polishing a hidden edge is money spent on nothing.
  • Ask for one sample edge in each finish before choosing a direction.
  • Note that flame polishing softens a sharp corner slightly, which matters on a tight fit.

Joints and hardware decide assembly time

Two units with identical sheet area can differ widely in assembly. A solvent-bonded joint is fast per joint but needs a jig to stay square, and it cannot be taken apart. A mechanical joint with bolts, or a slot-and-tab design, costs more in parts and drilling but allows flat packing and replacement in the field. Every additional part is another cut, another edge and another position that must align, which is why part count predicts assembly cost better than overall size does.

  • Count the parts: each one is a cut, an edge and a handling step.
  • Say whether the unit must ship flat or assembled, as this changes both labour and carton volume.
  • Ask which joints are structural and which are decorative.

Volume changes setup, not the sheet

Setup covers drawings, programming, jigs and the first-article check, and it is paid once. Material is paid per unit and barely moves with quantity, although nesting improves. Labour per unit falls as a run becomes efficient and then flattens. That is why the step from 50 to 500 units reduces the unit price far less than the step from five to fifty, and why a fifty-piece order cannot be priced at a five-hundred-piece rate without the factory absorbing the setup.

  • Ask for a price at 50, 200 and 500 so the curve is visible instead of assumed.
  • Confirm what the minimum quantity covers: production only, or sampling as well.
  • Production for a 50-unit order takes 3–7 days after drawings and order details are confirmed and payment is received; transport is excluded.

Packing and freight can outweigh the unit cost

A display that arrives broken is the most expensive display. Cartons are charged on volumetric weight, so a bulky unit with light contents can cost more to move by air than to manufacture. Corner protection, individual wrapping and a carton that stacks without crushing all add cost, and each of them is cheaper than a damage claim against a container. See the packing calculator.

  • Ask for the packed carton dimensions and weight, not only the product size.
  • Confirm whether units ship assembled or flat, because that sets the carton count.
  • For mixed orders, ask how cartons are marked so a warehouse can split them without opening everything.

Where the spread between two quotations comes from

When the same drawing returns two very different numbers, the difference is almost never the acrylic. It is the grade and thickness tolerance assumed, the edge finish left unwritten, hardware quoted one way and not the other, the packing standard left open, and whether freight was included. A quotation that does not state its assumptions cannot be compared with one that does, so the useful question is not who is cheaper but what each number includes.

  • Ask for thickness tolerance and sheet grade in writing.
  • Ask what the price becomes if the edge finish drops to sanded.
  • Ask whether the number is ex-works or delivered, and to which port.

Send this and the quotations become comparable

A drawing with dimensions, a material and thickness per part, an edge finish per edge, quantity tiers, packing and marking instructions, branding method, destination port and required date will produce quotes that can be compared line by line. A photograph produces a style match and an estimate, which is useful for a first conversation and inadequate for a purchase order. See the RFQ checklist.

  • Drawing or dimensioned sketch, including internal clearances.
  • Material and thickness for each part, plus edge finish for each edge.
  • Quantity tiers, packing requirements and the destination port.
  • Branding method and logo file, or a statement that the unit is unbranded.
  • Required date, so lead time and shipping can be separated in the answer.
SOURCE & REVIEW

How this buyer content is maintained

Published and reviewed by Yiwu Zhuochao Plastic Products Co., Ltd. Company facts are checked against the assessed Alibaba supplier profile; product and process guidance is based on the supplier’s current manufacturing scope and project-review workflow. Commercial terms and performance statements are published only where the owner can support them. Third-party certification issued by Intertek (天祥集团) is documented on the certification page; unit prices are quoted per project and are not published.

Last reviewed: Assessed supplier profile ↗Verified company facts →Factory evidence guide →
BUYER FAQ

Frequently asked questions

Why are two quotations for the same drawing so different?

Usually because the drawing was read two ways: one quote assumes cast sheet and polished edges, the other extruded sheet and sawn edges, and one includes packing while the other does not. Ask both suppliers to state grade, thickness tolerance, edge finish, hardware and freight basis on the quotation. Once those five lines match, whatever difference remains is real and worth negotiating.

Is a thicker sheet always better?

No. Thickness buys stiffness across an unsupported span, and it also buys weight, packing volume and cost. A short span in 3 mm can behave better than a long span in 5 mm, because span dominates deflection. Specify the span and the load first, then choose thickness, rather than starting from a thickness seen on another product.

Do you publish unit prices for these displays?

No. A custom display is priced from its drawing, sheet grade, edge finish, hardware and packed volume, so one published number would be wrong for almost every buyer. We quote per project and say which variables move the number, so the quotation can be tested against a different quantity or finish.

MORE SPECIFICATION NOTES

Continue with the notes

Acrylic display thickness: what 2 mm, 3 mm, 5 mm and 8 mm each support→Acrylic edge finishes: saw-cut, sanded, flame-polished and diamond-polished→Acrylic fabrication or injection molding: how order size decides→Buying acrylic displays from China: what happens between inquiry and container→Counter, shelf or floor: choosing the POP format before you design it→PMMA, PS, PC or PETG: choosing the plastic for a display stand→
CONTINUE RESEARCHING

Related buyer resources

How thickness is chosen→MOQ, sampling and lead time→Cosmetic display stands→
WAWhatsApp